Hardware Kits Cable Tray Support Brackets C Support Bracket | | L Support Bracket | Model | Length | Model | Length | 05-CM24-04201 | 6" | 05-CM18-04201 | 6" | 05-CM24-04202 | 8" | 05-CM18-04201 | 8" | 05-CM24-04205 | 12" | 05-CM18-04201 | 12" | 05-CM24-04208 | 18" | 05-CM18-04201 | 18" | 05-CM24-04210 | 24" | 05-CM18-04201 | 24" |  C Support Bracket |  L Support Bracket | Solid Bottom Plate Model | Dimensions
Width x Length | 05-2-06BP | 6” x 59” | 05-2-08BP | 8” x 59” | 05-2-12BP | 12” x 59” | 05-2-18BP | 18” x 59” | 05-2-24BP | 24” x 59” | • Galvanized steel or powder coated to provide a smooth protective surface for cable pulling
• Can be supplied pre-assembled to cable trays or installed in the field with #05-2-500985 Splice Washer Assys. 4/plate
• Available in easy to handle 59” lengths
• Fits cable trays 6, 8, 12, 18 and 24 inches wide |  Solid Bottom Plate | Cable Tray Cover Model | Dimensions
Width x Length | 05-CM21-04 | 4" x 59” | 05-CM21-06 | 6" x 59” | 05-CM21-08 | 8" x 59” | 05-CM21-12 | 12" x 59” | 05-CM21-18 | 18" x 59” | 05-CM21-24 | 24" x 59” |  Cable Tray Cover | Cable Tray Raised Floor Pedestal Supports 05-CM74-3 Angle Pedestal Support Kit - includes (2) Angle Supports and (2) "U" clamps
Clamps fit up to a 1 ½” dis. Pedestal
05-CM75-3 Raised Floor Pedestal Bridge Support Kit - includes (1) Bridge Support and (2) "U" clamps
Spans 24 inch center to center floor pedestals up to 1 1/2" dia.
Center Support Installation Hardware CM50 - 1/4 inch Threaded Rod Kit. Includes (2) 1/4 inch flat washer, (2) 1/4 inch nuts, (1) 6 inch silicione protective tube and (1) center support with hold down bracket. Threaded rod not included. CM51 - 3/8 inch Threaded Rod Kit. Includes (2) 3/8 inch flat washer, (2) 3/8 inch nuts, (1) 6 inch silicone protective tube and (1) center support with hold down bracket. Threaded rod not included. 
Click to enlarge
|  | Catalog Numbering System (example below is for an 8 inch center hung tray using 1/4 inch threaded rod) CM 50 08 Tray Widths: 2 inch = 02, 4 inch = 04, 6 inch = 06, 8 inch = 08, 12 inch = 12, 18 inch = 18, 24 inch = 24 Trapeze Support Installation Hardware CM52 - 1/4 inch Threaded Rod Kit. Includes (4) 1/4 inch flat washers and (4) 1/4 inch nuts. Threaded rod not included. CM53 - 3/8 inch Threaded Rod Kit. Inclueds (4) 3/8 inch flat washers and (4) 3/8 inch nuts. Threaded rod not included. 
Click to enlarge
Catalog Numbering System (example below is for an 18 inch trapeze hung tray using 3/8 inch threaded rod) CM 53 18 Tray Widths: 6 inch= 06, 8 inch= 08, 12 inch= 12, 18 inch= 18, 24 inch= 24 Raised Floor Support CM56 - Raised floor support, 4 inch height, available widths 2, 4, 6, 8, 12, 18 and 24 inches. Catalog Numbering System (example below is for an 8 inch wide raised floor support) CM56 08 Widths: 2 inch = 02, 4 inch = 04, 6 inch = 06, 8 inch = 08, 12 inch = 12, 18 inch = 18, 24 inch = 24 |  | Universal Beam Clamp Universal Beam Clamp for hanging of threaded rods
The universal beam clamps are made from zinc plated steel and fit 5/8” max beam flange.
05-CM100 fits 1/4”-20 threaded rod in bottom or side tapped hole
05-CM101 fits 3/8”-16 threaded rod in bottom or side tapped hole |  | Connecting Hardware 
Coupling Nuts
CM60 1/4"-20
CM61 3/8"-16 | 
Flat Washers
CM62 1/4"
CM63 3/8" | 
Finned Nuts
CM65 1/4"-20
CM66 3/8"-16
CM67 5/16"-18 | 
Carriage Bolts
CM68 5/16"-18 x 3/4"
CM72* 5/16"-18 x 1 1/4" | 
Protective Tubing
CM69
6" for
1/4" & 3/8" rod | | *For use with CM5803 and CM7003 only | Accessories 
Center Support
CM54xx
Widths
02, 04, 06, 08, 12 inches | 
Trapeze Support
CM55xx
Widths
06, 08, 12, 18, 24 inches | 
Wall Mount*
CM57xx
Widths
02, 04, 06, 08, 12, 18, 24 inches
| 
Tray Extension
Offset Loop
CM58
Ø.187"
(use 4 per tray) | 
Curved Tray Extension
CM58-5
(use 4 per tray) | 
Waterfall
CM59 (4 inch width)
Ø.187" | 
Universal Loop**
CM70xx
02 = Ø.187"
03 = Ø.250" | 
Ratchet
CM99 | *Anchor to floor or wall using 3/8 inch bolt & washer. Anchor hardware not included.
**Use 1 5/16 inch bolt on double loop end |
|
