 | Splice Washer Kit #05-2-600726 The cable tray straight and junction sections are easily joined together using installer-friendly splice washers kits. The kit contains one 1/4”-20 bolt washer, one splice washer, and one flanged hex nut. Material is zinc plated steel. | | Splice Washer Usage Per Tray Connection | 6” | 8” | 12” | 18” | 24” | 3 kits | 4 kits | 5 kits | | Tray Connection Loop Kit #05-2-500981(only for tray widths 12” or less) Splice connection loops are used to connect adjacent tray sections as a time saving alternative to use of splice washers. The kit contains one connection loop, one square washer, and one 5/16” carriage bolt and hex nut. Connection loop material is galvanized steel. Square washer material is zinc plated steel. |  | M.E.2 Cable Tray Mounting and Support Accessories Accessories Tray Divider #05-2-500983 for a 2” deep tray or #05-2-500984 for a 4” deep tray
The dividers are made from galvanized zinc plated steel and are 5’ long.
(requires two splice washer assemblies #05-2-500985 used to secure to each tray section) |  Cable Tray Divider | Splice Washer Assembly #05-2-500985
Used for securing tray dividers to tray section. Included (1) 1/4”-20 bolt and nut (1) splice washer | Hold Down Bracket #05-2-500982
Used to secure tray sections to hanging or floor supports. Material is steel wire powder coated chrome color 4” long. |  Hold Down Bracket | Universal Beam Clamp for hanging of threaded rods
The universal beam clamps are made from zinc plated steel and fit 5/8” max beam flange.
05-CM100 fits 1/4”-20 threaded rod in bottom or side tapped hole
05-CM101 fits 3/8”-16 threaded rod in bottom or side tapped hole |  Universal Beam Clamp | Cable Tray Support Brackets C Support Bracket | | L Support Bracket | Model | Length | Model | Length | 05-CM24-04201 | 6" | 05-CM18-04201 | 6" | 05-CM24-04202 | 8" | 05-CM18-04201 | 8" | 05-CM24-04205 | 12" | 05-CM18-04201 | 12" | 05-CM24-04208 | 18" | 05-CM18-04201 | 18" | 05-CM24-04210 | 24" | 05-CM18-04201 | 24" |  C Support Bracket |  L Support Bracket |
Cable Tray Raised Floor Pedestal Supports 05-CM74-3 Angle Pedestal Support Kit - includes (2) Angle Supports and (2) "U" clamps
Clamps fit up to a 1 ½” dis. Pedestal
05-CM75-3 Raised Floor Pedestal Bridge Support Kit - includes (1) Bridge Support and (2) "U" clamps
Spans 24 inch center to center floor pedestals up to 1 1/2" dia.  Solid Bottom Plate Model | Dimensions
Width x Length | 05-2-06BP | 6” x 59” | 05-2-08BP | 8” x 59” | 05-2-12BP | 12” x 59” | 05-2-18BP | 18” x 59” | 05-2-24BP | 24” x 59” | • Galvanized steel or powder coated to provide a smooth protective surface for cable pulling
• Can be supplied pre-assembled to cable trays or installed in the field with #05-2-500985 Splice Washer Assys. 4/plate
• Available in easy to handle 59” lengths
• Fits cable trays 6, 8, 12, 18 and 24 inches wide |  Solid Bottom Plate | Cable Tray Cover Model | Dimensions
Width x Length | 05-CM21-04 | 4" x 59” | 05-CM21-06 | 6" x 59” | 05-CM21-08 | 8" x 59” | 05-CM21-12 | 12" x 59” | 05-CM21-18 | 18" x 59” | 05-CM21-24 | 24" x 59” |  Cable Tray Cover |
|
