CABLE MGR is the most cost effective

CABLE MGR’s Pro-10 innovative steel mesh design with built-in splice/ground loops enables faster installation with less labor and materials.  Easy to engineer and identify individual fittings and/or parts (or we’ll even do it for you, for free). Cable Mgr is easily configured around obstacles and allows vertical changes by attaching the universal loop to tray sections. The straight sections and junctions address the entire range of applications.  Installation savings generally start at 50% and move higher dependent on the installation environment.

 Planning your installation is easy. You can even do it online with our new cable tray builder.  Tray sections, splices and supports make up every bill of material.  CABLE MGR offers a wide variety of sizes that will meet the fill capacity of every application. 

Why Use CABLE MGR?

There’s a BIG difference in wire mesh cable trays.  Other brands can’t equal CABLE MGR’s  PRO-10 benefits and unique design. 

• Stronger Construction –CABLE MGR is made from large gauge wire, 4.5mm or greater, with an extra side wire giving stronger, more robust load capabilities and ALL sizes are UL Classified.
• Built-In splice/ground loops- we’ve removed the finish for a fast and simple connection.
• Made in the USA –CABLE MGR is made in the USA by a USA owned company, (Most other brands are European manufactured/owned, and are not made by domestic workers)
• All tray sizes offered UL listed  –CABLE MGR has all sizes listed allowing you to meet UL grounding requirements (other brands have less than 6/many have none).  Dependent on the splicing method, most of the other brands require the additional materials and labor of a ground bolt, attached to each individual tray section, and connected by a minimum 6 awg ground wire that runs the length of the tray installation.
• Warranty available- CABLE MGR has a standard 3 year warranty
• Wide Range of Sizes & Colors Available – CABLE MGR offers depths of 2” -4”- 6” and widths of 4” – 36” (other brands have fewer), and in a standard powder coat finish of yellow, red, chrome, black, and orange.
• Custom tray and accessories- give us your specs and we’ll make your tray to suit. Try to get THAT from other tray manufacturers.

Components of a CABLE MGR Material List

CABLE MGR makes designing and planning cable pathways simple.  Trays are the backbone of every pathway application.  Choose a size of CABLE MGR that will accommodate the cable load required. 

1. Select the appropriate Straight Sections size -these are available in depths of 2, 4 and 6in – widths are 4,6,8,12,18,24,28,36in  and lengths of 1’,2’, 5’, 8’ and 10’.  (See our catalog for standard load/fill charts p. 14 – or visit our web page at www.cablemgr.com). All splice hardware is automatically included.
2. Select junctions – CABLE MGR offers fast and convenient pre-fabricated junctions to splice trays into a continuous run.  (See catalog pages 5 & 6).  Again, all splice hardware is automatically included.                                                             
3. Choose a Support Option - A complete selection of ceiling, wall, under floor or rack top support options are available.  Quantities are determined by support spacing (see cable load/fill chart p. 14, but 5ft is standard).                                                                                                                   

No Bending or Cutting CABLE MGR PRO-10

No time consuming cutting or bending to install CABLE MGR. Any pathway configuration is available by simply splicing the straight sections to junctions.  Cable Mgr’s patented design is the only one that eliminates sharp edges (from cutting the tray) that could damage you or your cable installation. 

Bends and elevation changes are made simple without cutting CABLE MGR straight sections.   Fasten horizontal junctions at the desired location with our splice options and your obstacle is avoided.  See our catalog pages 5 & 6 for creating all types of fittings.  You can also checkout our new cable tray builder at www.cablemgr.com .

Project Registration -CABLE MGR offers its distributors project registration (protection) for installations that they have worked to specified CABLE MGR.  Forms are available on line or from your Cable Mgr rep.

CABLE MGR Customers

Electrical and Datacom customers use Cable Mgr.  Check out our website to see our CABLE MGR Certified Contractors.  Anyone that installs cable is a candidate for Cable Mgr.  Schools, Hospitals, Banks, Fortune 1000’s, anyone with cable can utilize Cable Mgr Cable Management.  We provide onsite training, and a world-class team of inside sales and technical representatives that are ready to assist you with any questions you may have 800-548-5885 or email us at This e-mail address is being protected from spam bots, you need JavaScript enabled to view it   Drawing take-offs are available at no charge.