M.E.2 Cable Tray Connection Hardware
 |
Splice Washer Kit #05-2-600726 The cable tray straight and junction sections are easily joined together using installer-friendly splice washers kits. The kit contains one 1/4”-20 bolt washer, one splice washer, and one flanged hex nut. Material is zinc plated steel. |
|
|||||||||||||||
| Tray Connection Loop Kit #05-2-500981(only for tray widths 12” or less) Splice connection loops are used to connect adjacent tray sections as a time saving alternative to use of splice washers. The kit contains one connection loop, one square washer, and one 5/16” carriage bolt and hex nut. Connection loop material is galvanized steel. Square washer material is zinc plated steel. |
 |
||||||||||||||||
M.E.2 Cable Tray Mounting and Support Accessories
Center and trapeze supports are available when hanging the trays by using either 3/8” or 1/4” diameter threaded rods*, which are supplied by the installer. The cable trays can be also mounted along the sides of walls using wall mount brackets. A floor support is used when installing M.E.2 cable trays under raised flooring. |
||||
Center Support Kit #CM50XX-3: (2) 1/4” hex nut (1) 6” protective tubing (1) center support with hold down bracket |
||||
Center Support Kit #CM51XX-3: (2) 3/8” hex nut (1) 6” protective tubing (1) center support with hold down bracket |
||||
Trapeze Support Kit #CM52XX-3: (4) 1/4” flat washers (4) 1/4” hex nuts |
||||
Trapeze Support Kit #CM53XX-3: (4) 3/8” flat washers (4) 3/8” hex nuts |
||||
 |
 |
 |
 |
 |
| Center Support Kit #CM50XX-3 #CM51XX-3 |
Trapeze Support Kit #CM52XX-3 #CM53XX-3 |
Wall Mount Support #CM57XX-3 |
Floor Support #CM56XX-3 |
Cable Drop Out Waterfall #CM59-3 |
XX= Width of tray section ordered; 6”, 8”, 12”, 18” or 24”. Material for supports is steel wire, powder coated chrome color. *Threaded rod is not included in support kits and must be furnished by the installer. |
||||
 |
 |
 |
 |
 |
| Coupling Nuts #CM60 1/4"-20 #CM61 3/8"-16 |
Flat Washers #CM62 1/4" #CM63 3/8" |
Finned Nuts #CM65 1/4"-20 #CM66 3/8"-16 #CM67 5/16"-18 |
Carriage Bolts #CM68 5/16"-18 x 3/4" #CM72 5/16"-18 x 1 1/4" |
Split Bolt for Grounding #05-2-600727 |
 |
 |
 |
||
| Ratchet #CM99 |
Cable Tray Cutter #05-2-600728 |
Protective Tubing #CM69 6" for 1/4" & 3/8" rod |
||
Accessories
| Tray Divider #05-2-500983 for a 2” deep tray or #05-2-500984 for a 4” deep tray The dividers are made from galvanized zinc plated steel and are 5’ long. (requires two splice washer assemblies #05-2-500985 used to secure to each tray section) |
 Cable Tray Divider |
| Splice Washer Assembly #05-2-500985 Used for securing tray dividers to tray section. Included (1) 1/4”-20 bolt and nut (1) splice washer |
|
| Hold Down Bracket #05-2-500982 Used to secure tray sections to hanging or floor supports. Material is steel wire powder coated chrome color 4” long. |
 Hold Down Bracket |
| Universal Beam Clamp for hanging of threaded rods The universal beam clamps are made from zinc plated steel and fit 5/8” max beam flange. 05-CM100 fits 1/4”-20 threaded rod in bottom or side tapped hole 05-CM101 fits 3/8”-16 threaded rod in bottom or side tapped hole |
 Universal Beam Clamp |
Cable Tray Support Brackets
C Support Bracket |
L Support Bracket |
|||
Model |
Length |
Model |
Length |
|
05-CM24-04201 |
6" |
05-CM18-04201 |
6" |
|
05-CM24-04202 |
8" |
05-CM18-04201 |
8" |
|
05-CM24-04205 |
12" |
05-CM18-04201 |
12" |
|
05-CM24-04208 |
18" |
05-CM18-04201 |
18" |
|
05-CM24-04210 |
24" |
05-CM18-04201 |
24" |
|
 C Support Bracket |
 L Support Bracket |
|||
Cable Tray Raised Floor Pedestal Supports
05-CM74-3 Angle Pedestal Support Kit - includes (2) Angle Supports and (2) "U" clamps
Clamps fit up to a 1 ½” dis. Pedestal
05-CM75-3 Raised Floor Pedestal Bridge Support Kit - includes (1) Bridge Support and (2) "U" clamps
Spans 24 inch center to center floor pedestals up to 1 1/2" dia. 
Solid Bottom Plate
Model |
Dimensions Width x Length |
05-2-06BP |
6” x 59” |
05-2-08BP |
8” x 59” |
05-2-12BP |
12” x 59” |
05-2-18BP |
18” x 59” |
05-2-24BP |
24” x 59” |
| • Galvanized steel or powder coated to provide a smooth protective surface for cable pulling • Can be supplied pre-assembled to cable trays or installed in the field with #05-2-500985 Splice Washer Assys. 4/plate • Available in easy to handle 59” lengths • Fits cable trays 6, 8, 12, 18 and 24 inches wide |
|
 Solid Bottom Plate |
|
Cable Tray Cover
Model |
Dimensions Width x Length |
05-CM21-04 |
4" x 59” |
05-CM21-06 |
6" x 59” |
05-CM21-08 |
8" x 59” |
05-CM21-12 |
12" x 59” |
05-CM21-18 |
18" x 59” |
05-CM21-24 |
24" x 59” |
 Cable Tray Cover |
|
|
|
